Features:
• This probe is recommended for high performance probing applications and is adjustable for low and high frequencies.
• The probe's entire core is made of a high quality ceramic hybrid.
• Pure coaxial design and laser trimmed resistors ensure highest signal fidelity along the signal path offering high bandwidth and fast risetimes for accurate impulse measurements.
• Probe tips are interchangeable and can be replaced easily.
• Accessories (one of each) included with Probe are:
  - BNC Adapter
  - Ground Blade
  - Ground Spring
  - Ground Lead with Alligator Clip 11 cm (4.33”)
  - IC Caps: 0.8mm, 1.0mm, and 1.27mm pitch
  - Insulating Cap
  - Protection Cap
  - Solid Tip 0.8mm (0.0315”)
  - Spring Tips 0.8mm (0.0315”) & 0.38mm (0.015”)
  - Sprung Hook
  - Trimmer Tool
  - 2 Footer Positioner
  - Coding Rings (Set) 3 X 4 colors
  - Copper (Cu) Pads
• Our passive probes are spring loaded, with needle sharp tips to support precise and safe measurements.
 
Specifications:
• Attenuation Ratio: 10:1
• Maximum Input Voltage CAT II : 300 Vrms
• Scope Bandwidth MHz : 500
• System Bandwidth MHz (-3 dB) : 500
• System Risetime (ns) : < 0.7
• Probe Input Resistance (MΩ) : 10
• Probe Input Capacitance (pF) : < 11
• Compensation Range (pF) : 10 - 20
• Readout Actuator : Yes
• Cable Length : 4 ft. (1.2 m)

Ratings:
• Maximum voltage must be derated with respect to frequency